Duty Exemption Scheme I-O Norms LEATHER PRODUCTS ______________________________________________________________________________________________________________________ S.No Export Item Import Item _______________________________________________ ______________________________________________________ Name Quantity Name Quantity Allowed ______________________________________________________________________________________________________ |
||||||
G1 |
All type Leather garments
including coats/jackets having consumption of finished leather above 25
Sq.ft. |
1No. |
1 |
a) |
Outer lining (Polyester/Nylon/Viscose/Cotton Fabric Cowry/Blended Fabrics/Wool Synthetic Lining) - (only the relevant items used/to be used in export is to be allowed for import). |
0.066 ** |
|
|
b) |
Fusible lining |
.0336 ** |
||
|
|
c) |
Quilting/Foam lining |
0.0449 ** |
||
|
|
d) |
Rib cloth (for Cuff & Coller) |
0.0274 ** |
||
|
|
e) |
Artificial Furlining |
0.0274 ** |
||
|
|
f) |
Re-inforcement Tape (Max. Width 2.5") (For Coat/Jackets only) |
0.0136 ** |
||
|
|
g) |
Components (Zip Fastners, Snap Fastners, Buttons, Eyelets, Labels, Tags, Badges, Rings, Cord-Nylon/Cotton, Shoulder Pads,Buckle, Elastic) |
Net to Net. |
||
|
|
h) |
Thread |
7.23 Mtrs. |
||
|
2 |
|
For 1000 pcs. |
|
||
|
|
a) |
Needles |
150 Nos. |
||
|
|
b) |
Bobbin |
10 Nos. |
||
|
|
c) |
Needle Bar |
1 No. |
||
|
|
d) |
Feed Dock |
1 No. |
||
|
|
e) |
Hook set |
1 No. |
||
|
|
f) |
Bobbin Case |
2 nos. |
||
** Quantities given are in Sq.Mtr per Sq.Ft. of leather
in export product. |
||||||
G2 |
All type Leather garments including coats/jackets
having consumption of finished leather of 25 sq.ft. and below. |
1 No. |
1 |
a) |
Outer lining (Polyester/Nylon/Viscose/Cotton Fabric Cowry/blended Fabrics/Wool Synthetic Lining) - (only the relevant items used/to be used in export is to be allowed for import). |
0.0449 ** |
|
|
b) |
Fusible Lining |
0.0114 ** |
||
|
|
c) |
Quilting/ Foam lining |
0.0305 ** |
||
|
|
d) |
Rib cloth (for Cuff & Coller) |
0.023 ** |
||
|
|
e) |
Artificial Fur lining |
0.023 ** |
||
|
|
f) |
Re-inforcement Tape (Max Width 2.5") (For Coat/ Jacket only) |
0.0833 ** |
||
|
|
g) |
Components (Zip Fastners, Snap Fastners, Buttons, Eyelets, Labels Tags, Badges, Rings, Cord-Nylon/Cotton, Shoulder Pad, Buckle, Elastic) |
Net to Net. |
||
|
|
h) |
Thread |
7.665 Mtrs. |
||
|
2 |
|
For 1000 pcs. |
|
||
|
|
a) |
Needles |
150 Nos. |
||
|
|
b) |
Bobbin |
10 Nos. |
||
|
|
c) |
Needle Bar |
1 No. |
||
|
|
d) |
Feed Dock |
1 No. |
||
|
|
e) |
Hook set |
1 No. |
||
|
|
f) |
Bobbin Case |
2 Nos. |
||
** Quantities given are in Sq.Mtr. per Sq.Ft. of
Leather in export product. |
||||||
G3 |
Children Leather Shoes |
1 Pair |
1 |
a) |
Synthetic Lining |
1.25 sq.ft. |
|
|
b) |
Full Insole socks (Synthetic) |
0.30 sq.ft. |
||
|
|
c) |
Adhesive (PU/Latex/Neoprene) |
15 gms. |
||
|
|
d) |
Shoe finishes (Polish) |
3 gms. |
||
|
|
e) |
Shoe finishes (spray) |
6 gms. |
||
|
|
f) |
Stamping Foil |
6 sq. inches |
||
|
|
g) |
Sewing Threads |
12 mtrs. |
||
|
|
h) |
Thermoplastic sheet for: |
|
||
|
|
i) |
Reinforcement Tape (Max. widht 1.5 cm ) |
0.25 mtr. |
||
|
|
j) |
Sheets for making insole |
0.03 sq. mtr. |
||
|
|
k) |
Nails/Tacks |
10 gms. |
||
|
|
l) |
Thermoplastic Cement |
7 gms. |
||
For per kg. of unit Rubber sole |
|
m) |
Unit sole |
Net to Net |
||
|
|
m) |
4). Antioxidants/Accelerator |
28 gms. |
||
For per kg. of PVC Sole |
|
|
m) PVC Moulding Powder Granules (in case of PVC Sole) |
1.035 kg |
||
For per kg. of TPR Sole |
|
|
m) TPR Granules (in case of TPR Sole) |
1.035 kg |
||
|
1 |
n) |
Heal (if not attached with unit sole) |
1 pair |
||
|
|
o) |
Shoe lace |
Net content + 1% wastage |
||
|
|
p) |
Lables/Logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
Net content + 1% wastage |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Zip fastners |
Net content + 1% wastage |
||
|
|
t) |
Elastic |
Net content + 1% wastage |
||
|
|
u) |
Velcro tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking Board |
1 No./7500 pairs. |
||
|
|
b) |
Binding Guage |
1 No./10000 pairs. |
||
|
|
c) |
Industrial Sewing machine needles/hammer needle |
40 pcs./1000 pairs |
||
|
|
d) |
Bell/Skiving knives |
1 No./10000 pairs. |
||
|
|
e) |
Band knives for splitting Machine |
1 No./2250 pairs. |
||
|
|
f) |
Grinding wheels |
2 No./1000 pairs. |
||
|
|
g) |
Feed Rollers |
1 No./1000 pairs. |
||
|
|
h) |
Set of cutting dies of various designs |
1 No./1000 pairs |
||
|
|
i) |
Silver marking pencils/pens/refills. |
1 No./1000 pairs. |
||
|
|
j) |
Abrasive paper/emery paper/belts/cup shapes |
1 sq.mtr./150 pairs. |
||
|
|
k) |
Brushes of all types |
2 pcs./1000 pairs. |
||
|
|
l) |
Sea Sponge |
1 pc./1000 pairs. |
||
|
|
m) |
Plastic Shoe last |
4 pairs/1000 pairs. |
||
|
|
n) |
Heating elements |
1 No./1000 pairs. |
||
|
|
o) |
Cutters and trimmers (all types) for footware making |
1 No./500 pairs. |
||
Note: 1. Import of synthetic rubber allowed in item No.
1(m), (1) shall not exceed 50% of the total rubber allowed. Note: 2 For
requirement of processing chemicals as per Note 7 under the 'General Notes for
Leather and Leather Products',finished leather required per pair is (i) 2.95
sq.ft. if item at sl.no.1(a) & (b) are not asked for, (ii) 2.65 sq.ft.
per pair if item at sl.no.1(a) is not asked for, (iii) 1.7 sq.ft. per pair if
item at sl.no.1(b) is not asked for and(iv) 1.4 sq.ft per pair if item at
sl.no.1(a) & 1(b) are not asked for. |
||||||
G4 |
Children Rubber and Canvas footwear with rolled soles |
1000 pairs |
1 |
|
Natural/Synthetic Rubber SBR(1502/1712)PBR/EVA/TPR/Isoprene |
141 kgs |
|
2 |
|
Accelerators/ Antioxidents/ Retarders |
4.8 kgs. |
||
|
3 |
|
Relevant Colours & Pigments |
2.82 kgs. |
||
|
4 |
|
Fillers |
42.3 kgs. |
||
|
5 |
|
Adhesive (PU/ Polychloroprene/ PVA/ Acrylics/ Isocyanate) |
12 kgs. |
||
|
6 |
|
Solvents(MEK) |
47.2 Ltr. |
||
|
7 |
|
Misc. Chemicals Silica, Rosin |
6.6 kgs. |
||
|
8 |
|
Cotton Textile/Canvas cloth for upper |
115 Sq.mtr. |
||
|
9 |
|
Laces |
Net content + 1% wastage |
||
|
10 |
|
Threads |
15000 mtrs |
||
|
11 |
|
Elastic Tapes |
16 Sq.Mtrs. |
||
|
12 |
|
Components/ Embellishments |
Net content + 1% wastage |
||
Note :1. In Item 1, import of synthetic rubber shall not
exceed 50% of the total rubber allowed. |
||||||
G5 |
Children Rubber and Canvas shoe with moulded sole |
One Pair |
1 |
|
Cotton Textile/Canvas for Upper |
0.110 Sq.mtr |
|
2 |
|
Cotton fabric for lining (if used) |
0.105 Sq.mtr |
||
|
3 |
|
Insole material with lamination |
0.024 Sq.mtr. |
||
|
4 |
|
Adhesive (PU/ Polychloroprene/ PVA/ Acrylics) |
12 gms |
||
|
5 |
|
Solvent(MEK) |
0.047 Ltr. |
||
|
6 |
|
Laces |
Net content + 1% wastage |
||
|
7 |
|
Embellishment |
Net content + 1% wastage |
||
|
8 |
|
Elastic tape |
0.016 Sq.Mtrs. |
||
|
9 |
|
Thread |
15 Mtr. |
||
|
10 |
|
Sole Moulds |
1 Pair per 10000 pairs |
||
Per kg. of moulded Sole (including other rubber materials |
11 |
a) |
Natural/Synthetic Rubber SBR(1502/1712)/PBR/EVA/TPR/Isoprene |
495 gms. |
||
|
|
b) |
Accelators/Antioxidants |
10 gms |
||
|
|
c) |
Relevant colours and pigments |
10 gms |
||
|
|
d) |
Fillers |
170 gms |
||
|
|
e) |
Misc.Chemicals(Zinc Oxide, Rosin) |
27 gms |
||
Note: 1. In item no.11, import of synthetic rubber
shall not exceed 50% of the total rubber allowed. |
||||||
G6 |
Fine/Fancy Leather Gloves |
1 Pair |
1 |
a) |
Relevant Liners/Lining Material |
Net content + 1% wastage |
|
|
b) |
Cloth Lables |
Net content + 1% wastage |
||
|
|
c) |
Hooks |
Net content + 1% wastage |
||
|
|
d) |
UPC paper Stickers |
Net content + 1% wastage |
||
|
|
e) |
Hang Tags |
Net content + 1% wastage |
||
|
|
f) |
Price Tickets |
Net content + 1% wastage |
||
|
|
g) |
Threads: |
|
||
|
|
|
1) For Ladies |
16 mtr. |
||
|
|
|
2) For Gents |
18 mtrs. |
||
Note: 1. The average consumption of finished leather
for ladies hand gloves will be 2 sq.ft./pair and that of gents 2.5
sq.ft./pair. |
||||||
G7 |
Finished Leather from Hide of Cow/ Buffalo |
1000 Sq. ft. |
1 |
|
Preservative |
2 kgs |
|
2 |
|
Wetting Agent |
10 kgs |
||
|
3 |
|
Soaking Enzyne |
5 kgs |
||
|
4 |
|
Unhairing Agent: |
|
||
|
|
|
a)Sodium Sulphide |
5 kgs |
||
|
|
|
b)Sulfohydrate |
5 kgs |
||
|
5 |
|
Leather Liming Auxilliaries |
2.5 kgs |
||
|
6 |
|
Deliming Agent |
10 kgs |
||
|
7 |
|
Bating Agent |
5 kgs |
||
|
8 |
|
Leather Degreasing Agent (Fatty Alcohol/Esters Fatty Acid Derivatives) |
5 kgs |
||
|
9 |
|
Bleaching Agents (Sodium Bisulfite/ Hydrogen Peroxide/ Sodium Chlorite/ Potassium Per-Manganate) |
2.50 kgs |
||
|
10 |
|
Formic Acid |
10 kgs |
||
|
11 |
|
Acetic Acid |
5 kgs |
||
|
12 |
|
Chrome Tanning Agent: |
|
||
|
|
a) |
For all Chrome Tanned Leather |
50 kg |
||
|
|
b) |
For Vegetable Tanned Leather Main vegetable tanning Agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/ Chestnut/ Tara / Sumac subject to the condition That Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum of 30 kg. |
150 kg |
||
|
|
c) |
For combination of tanned leather/semi-chrome tanned
leather |
|
||
|
13 |
|
Zirconium Tanning Salt |
10 kgs |
||
|
14 |
|
Sodium Formate/Acetate |
8 kgs |
||
|
15 |
|
Sodium Bicarbonate |
8 kgs |
||
|
16 |
|
Soda Ash |
4 kgs |
||
|
17 |
|
Magnesium Oxide |
5 kgs |
||
|
18 |
|
Syatan |
54 kgs |
||
|
19 |
|
Oxalic Acid |
2.50 kgs |
||
|
20 |
|
Sodium Dithionate (Hy-drose) |
2.50 kgs |
||
|
21 |
|
Fatliquors |
24 kgs |
||
|
22 |
|
Dye Levelling Agent |
2 kgs |
||
|
23 |
|
Dyes (Acid dyes/ Direct dyes/ Premetallised dyes/Basic Dyes/ Reactive dyes/ Sulphur dyes) |
12 kgs (Out of the total quantity of 12 kgs, the quantity of Reactive dyes shall not exceed 0.6 kg) |
||
|
24 |
|
Dispersing Agent |
5 kgs |
||
|
25 |
|
Cationic Dye Fixative |
5 kgs |
||
|
26 |
|
Impregnating Resin |
20 kgs |
||
|
27 |
|
Penetrating Agent |
4 kgs |
||
|
28 |
|
Pigments |
10 kgs |
||
|
29 |
a) |
Binders other than those indicated below |
10 kgs |
||
|
|
b) |
Casein based Binders |
5 kgs |
||
|
|
|
Resin/Polyurathane based binders |
10 kgs |
||
|
30 |
|
Liquid Dyes (Based on Acid dyes/ Basic dyes/ Metal complex dyes) |
10 ltrs |
||
|
31 |
|
Feel Modifiers |
1 kg |
||
|
32 |
|
Lacquer Emulsion |
10 kgs |
||
|
33 |
|
Slipagents (Silicon based Oil) |
1 kg |
||
|
34 |
|
Fixing Agents/ Cross Linkers (Formaldehyde free) |
1 kg |
||
|
35 |
|
Wax Emulsion |
2 kgs |
||
|
36 |
|
i)Oil for pull up finish |
15 kgs |
||
|
|
|
ii)Wax for pull up finish |
10 kgs |
||
|
37 |
|
Fillers for Leather Industry |
3 kg |
||
|
38 |
|
Spl. Auxiliaries for Stain/ Fire/ Grease/ Water/ Alkali/ Acid/ Oil Resistance |
5 kgs |
||
|
39 |
|
Pearlised Pigment and Powder |
1 kg |
||
|
40 |
|
Fluorescent Pigment |
4 kgs |
||
|
41 |
|
Special Lacquer for Brush off/ Two tone |
10 kgs |
||
|
42 |
|
*Transfer foil (Polyester/ Polyurethane Metalised film - Silver/ Gold/ Bronze/ Mat/ Plain/ Two Tone effect/ Glazy/ Nubuck effect/ Pull up effect/ Suede effect/Floral and other design effects) |
120 sq. Mtrs. |
||
|
|
|
Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. |
|
||
|
43 |
|
Miscellaneous Items: |
|
||
|
|
|
a) Knife Blades/ Band Knives: |
|
||
|
|
|
b) Grinding wheels for Splitting Machine/Fleshing Machine/Shaving Machine |
upto 5% of FOB value of export, out of which value of each of the items at (e), (g) & (h) shall not exceed 5% of the overall CIF value of miscellaneous items permitted for import. |
||
|
|
|
c) Felt/ Felt Sleeves Samming Machine/ Setting cum Samming/ Polishing Felt Roller |
|
||
|
|
|
d) Stones: |
|
||
|
|
|
e) Emery Paper: |
|
||
|
|
|
f) Glazing Glass |
|
||
|
|
|
g) Padding Mohair cloth |
|
||
|
|
|
h) Embossing plate |
|
||
Note: In case of export of Suede and Nubuck leather,
the quantity of the import item 24 i.e. Dyes shall be enhanced to "20
kgs (Out of the total quantity of 20 kgs, the quantity of Reactive Dyes shall
not exceed 0.6 kg).Note: 2. Item No. (ii) for 12 (a) shall not be allowed for
the grain garment leather and gloving leather.Note: 3. Supplementary
Vegetable Tanning Agents Gambier/ Chestnut/ Tara/ Sumac shall be allowed for
import on Actual User condition. In case of DFRC, these items shall be used
by the licensee only and shall not be allowed for transfer/sale. |
||||||
G8 |
Gents Leather Half Boot Uppers |
1 Pair |
1 |
a) |
Synthetic Lining |
3.75 Sq. ft. |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
12.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
7 gms |
||
|
|
e) |
Shoe finishes (Spray) |
15 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
50 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
1.10 mtr |
||
|
|
j) |
Eyelets |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fastners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: 1. For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per pair is (i) 8 sq.ft. if item 1(a) and 1(b) are not asked
for, (ii) 7.5 sq.ft if item1(a) is not asked for, (iii) 4.5 sq.ft. if item
1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) & (b) is asked for. |
||||||
G9 |
Gents Leather Half Boots |
1 Pair |
1 |
a) |
Synthetic lining |
3.75 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
c) |
Adhesive (PU/ Neoprene/ latex) |
40.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
07.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
15.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
50 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
01.1 mtrs |
||
|
|
j) |
Sheet for making insole |
0.050 sq mtr |
||
|
|
k) |
Nails/ tacks |
15 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
11 gms |
||
|
|
m) |
Unit sole with or without heel |
Net to Net |
||
Per Kg. of P.U. Sole |
1 |
m) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment ppaste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
|
m) |
(i) Natural/Synthetic Rubber SBR(1502/1712)/PBR |
660 gms |
||
|
|
|
(ii) Precipated silica |
114 gms |
||
|
|
|
(iii) Elasto polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 gms |
||
|
1 |
n) |
Heels (if not attached with unit sole) |
Net to Net |
||
|
|
o) |
Shoe-Lace |
Net to Net |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
1 Pair |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
t) |
Zip fastners |
Net content + 1% wastage |
||
|
|
u) |
Elastic |
Net content + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
Note:1. Antioxidants shall be restricted upto 2% of
weight of Natural/ Synthetic Rubber. Note: 2 For requirement of processing
Chemicals as per Note 7 under the 'General Notes for Leather and Leather
Products', finished leather required perpair is (i) 8 sq.ft. if item 1(a)
& 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for,
(iii) 4.5 sq.ft if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a)
& 1(b) are asked for. |
||||||
G10 |
Gents Leather Long Boots/ Gents Leather Long Boot
Lasted Uppers |
1 Pair |
1 |
a) |
Synthetic lining |
4.5 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
c) |
Adhesive (PU/ Neoprene/ Latex ) |
50.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
09.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
20.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
70 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
01.5 mtrs |
||
|
|
j) |
Sheet for making insole |
0.050 sq mtr |
||
|
|
k) |
Nails/ tacks |
15 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
11 gms |
||
|
|
m) |
Unit sole with or without heel |
Net to Net |
||
Per Kg. of P.U. Sole |
1 |
m) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
1 |
m) |
(i) Natural/synthetic rubber SBR(1502/1712)/PBR |
660 gms |
||
|
|
|
(ii) Precipitated silica |
114 gms |
||
|
|
|
(iii) Elasto polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 mgs |
||
|
1 |
n) |
Heels (if not attached with unit sole) |
Net to Net |
||
|
|
o) |
Shoe-Lace |
Net to Net |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
1 Pair |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
t) |
Zip fastners |
Net content + 1% wastage |
||
|
|
u) |
Elastic |
Net content + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
Note:1. Antioxidants shall be restricted to 2% of
weight of Natural/ Synthetic Rubber allowed. 2. For requirement of processing
chemcials as per Note 7 under the 'General Notes for Leather and Leather
Products', finished leather requiredper pair is (i) 10 sq.ft. if item 1(a)
& 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for,
(iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a)
& (b) are asked for.3. Import of various items covered by Sl. No. 1(m)
shall not be permitted in the case of export product "Gents Leather Long
Boot Lasted Uppers." 4. Import of synthetic rubber shall not exceed 50%
of total rubber allowed. |
||||||
G11 |
Gents Leather Sandal Upper |
1 Pair |
1 |
|
ACCESSORIES : |
|
|
|
a) |
Synthetic Lining |
1.2 sq.ft. |
||
|
|
b) |
Adhesive/Synthetic/Latex |
24 gms. |
||
|
|
c) |
Shoe finishes (Polish) |
3.6 gms. |
||
|
|
d) |
Shoe finishes (Spray) |
8.4 gms. |
||
|
|
e) |
Stamping Foil |
2.46 sq.inches |
||
|
|
f) |
Re-inforcement |
0.48 mtr. |
||
|
|
g) |
Eyelets, Laces and Elastics |
Net content + 1% wastage |
||
|
2 |
|
Miscellaneous items: |
|
||
|
|
a) |
Clicking board |
1 no./7500 pairs |
||
|
|
b) |
Binding Guage |
1 no./10000 pairs |
||
|
|
c) |
Industrial Sewing machine needles/hammer |
50 Pcs./1000 pairs |
||
|
|
d) |
Bell/Skiving knives |
1 no./2500 pairs |
||
|
|
e) |
Band knives for splitting Machine |
1 no./5000 pairs |
||
|
|
f) |
Grinding wheel |
1 no./2500 pairs |
||
|
|
g) |
Feed Rollers |
1 no./5000 pairs |
||
Note: 1. Requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', shall be
worked out taking into account the area of Finished Leather as 1.5
sq.ft./pair of Gents Leather Sandle Upper. |
||||||
G12 |
Gents Leather sandals with P.U Sole/Rubber Sole /PVC
Sole |
1 Pair |
1 |
a) |
Synthetic thread |
10 mts |
|
|
b) |
Footwear dressing |
15 gms |
||
|
|
c) |
Adhesives (PU/ Neoprene/ Cement/ PVA) |
30 gms |
||
|
|
d) |
Insole board |
0.52 sq.ft |
||
|
|
e) |
Polyuerethene foam sheet |
10 gms |
||
|
|
f) |
Buckles |
Net to Net |
||
|
|
g) |
Tacks |
2 gms |
||
|
|
h) |
Unit sole |
Net to Net |
||
Per Kg. of P.U. Sole |
1 |
h) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
1 |
h) |
(i) Natural rubber/ Synthetic rubber / PBR/ SBR (1502/1712) |
660 gms |
||
|
|
|
(ii) Precipitated silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxident/ Accelerators |
28 gms |
||
Per Kg. of PVC Sole |
|
|
i) PVC Resin |
0.5329 Kg |
||
|
|
|
ii) Plasticiser (DOP) |
0.3997 Kg |
||
|
|
|
iii) Stabilizer (Ba-Cd-Zn) |
0.0159 Kg |
||
|
|
|
iv) Antimony Trioxide |
0.014 Kg |
||
|
|
|
v) Pigments |
0.008 Kg |
||
|
|
|
vi) Solvents (MEK/Xylene) |
0.0015 Kg |
||
Note: 1. Antioxidant shall restricted to 2% of weight
of Natural/ Synthetic Rubber. 2. Import of Synthetic Rubber shall not exceed
50% of the Total Rubber allowed. 3. For requirement of processing Chemicals
as per Note 7 under the 'GeneralNotes for Leather and Leather Products',
finished leather required is 1.5 sq.ft. per pair |
||||||
G13 |
Gents Leather Shoe Uppers(Stitched/unstitched) |
1 Pair |
1 |
a) |
Synthetic lining/Artificial furlining. |
1.75 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
10.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
5.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
10.00 gms |
||
|
|
f) |
Stamping foil |
06.00 sq. inch |
||
|
|
g) |
Sewing thread |
25 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (max width 1.5 cms) |
0.50 mtr |
||
|
|
j) |
Eyelet |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fasteners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: 1. For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not
asked for, (ii) 3.75 sq.ft. ifitem 1(a) is not asked for, (iii) 2.5 sq.ft. if
item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) & (b) is asked
for. |
||||||
G14 |
Gents Leather Shoes |
1 Pair |
1 |
a) |
Synthetic lining |
1.75 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
|
Full insole socks partly made of leather and partly of synthetic with or without shank |
Net to Net. |
||
|
1 |
c) |
Adhesives (PU/ Neoprene/ Latex ) |
30.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
05.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
10.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
25 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
|
h) |
i) Counter/Stiffner made of leather/leather board. |
Net to Net. |
||
|
|
|
ii) Toe Puff/caps made out of Thermo Plastic Sheets or Foam. |
Net to Net. |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
0.50 mtrs |
||
|
|
j) |
Sheet for making insole |
0.050 sq mtr |
||
|
|
k) |
Nails/ tacks |
15 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
0.011 kg |
||
|
|
m) |
Unit sole with or without heel |
1 Pair |
||
Per Kg. of P.U. Sole |
1 |
m) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
|
m) |
(i) Natural/ Synthetic Rubber SBR(1502/1712) |
660 gms |
||
|
|
|
(ii) Precipitated Silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 gms |
||
Per Kg. of PVC Sole |
|
m) |
PVC Moulding Powder/ Granules in case of PVC Sole |
1.035 Kg |
||
Per Kg. of TPR Sole |
|
m) |
TPR Granules (in case of TPR Sole) |
1.035 Kg |
||
|
|
m) |
Styrene Butadine Styrene Oil bound Co-polymer |
0.803 kg |
||
|
1 |
n) |
Heel (if not attached with unit sole) |
1 Pair |
||
|
|
o) |
Shoe-Lace |
1 Pair |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
1 Pair |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
t) |
Zip fastners |
Net content + 1% wastage |
||
|
|
u) |
Elastic |
Net content + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
|
|
1) |
For retanning |
12 kg |
||
Note: 1. Antioxidant shall be restricted to 2% of
weight of Natural/ Synthetic Rubber. 2. For requirement of processing
Chemicals as per Note 7 under the 'General Notes for Leather and Leather
Products', finished leather required per pairsis (i) 4.25 sq.ft. if item 1(a)
and 1(b) are not asked for, (ii) 3.75 sq.ft if item 1(a) is not asked for,
(iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a)
& (b) is asked for. 3. Import of synthetic rubber shallnot exceed 50% of
the total rubber allowed. |
||||||
G15 |
Gents Long Boot Uppers (upto Knee) |
1 Pair |
1 |
a) |
Synthetic lining/Artificial furlining |
4.5 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.5 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
15.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
09.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
20.00 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
70 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.014 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.009 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
1.50 mtr |
||
|
|
j) |
Eyelets |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fastners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: 1. For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per pair is (i) 10 sq.ft. if item 1(a) & 1(b) are not
asked for, (ii) 9.5 sq.ft. if item1(a) is not asked for, (iii) 5.5 sq.ft. if
item 1(b) is not asked for,and (iv) 5.00 sq.ft. if 1(a) & (b) is asked
for. |
||||||
G16 |
Gents Rubber and Canvas footwear with rolled soles |
1000 pairs |
1 |
|
Natural/Synthetic Rubber SBR(1502/1712)/EVA/TPR/Isoprene |
227 kgs. |
|
2 |
|
Accelerators/Antioxidents/Retarders |
7.78 kgs. |
||
|
3 |
|
Relevant Colours & Pigments |
4.54 kgs |
||
|
4 |
|
Fillers |
68.14 kgs |
||
|
5 |
|
Adhesive (PU/Polychloroprene/PVA/Acrylics/Isocyanate) |
18 kgs. |
||
|
6 |
|
Solvents(MEK) |
76.0 Ltrs |
||
|
7 |
|
Misc.Chemicals Silica, Rosin |
10.5 kgs. |
||
|
8 |
|
Cotton Textile/Canvas cloth for upper |
194 Sq. mtr. |
||
|
9 |
|
Laces |
Net content + 1% wastage |
||
|
10 |
|
Threads |
20000 mtrs |
||
|
11 |
|
Elastic Tapes |
18 Sq. Mtr. |
||
|
12 |
|
Components/ Embellishments |
Net content + 1% wastage |
||
Note :1. In Item 1, import of synthetic rubber shall
not exceed 50% of the total rubber allowed. |
||||||
G17 |
Gents Rubber and Canvas shoes with moulded sole |
One Pair |
1 |
|
Cotton Textile/Canvas for Upper |
0.185 Sq.mtrs |
|
2 |
|
Cotton fabric for linning (if used) |
0.180 Sq.mtr |
||
|
3 |
|
Insole material with lamination |
0.048 Sq.mtr |
||
|
4 |
|
Adhesive (PU/Polychloroprene/PVA/ Acrylics) |
18 gms |
||
|
5 |
|
Solvent (MEK) |
0.076 Ltr. |
||
|
6 |
|
Laces |
Net to Net |
||
|
7 |
|
Embellishment |
Net to Net |
||
|
8 |
|
Elastic tape |
0.018 Sq.Mtr. |
||
|
9 |
|
Thread |
20 Mtr. |
||
|
10 |
|
Sole Moulds |
1 Pair per 10000 pairs |
||
Per Kg. of Moulded Sole(including other rubber material) |
11 |
a) |
Natural/synthetic Rubber SBR(1502/1712)/PBR/EVA/TPR/Isoprene |
495 gms. |
||
|
|
b) |
Accelators/Antioxidants |
10 gms |
||
|
|
c) |
Relevant colours and pigments |
10 gms |
||
|
|
d) |
Fillers |
170 gms |
||
|
|
e) |
Misc.Chemicals(Zinc Oxide, Rosin) |
27 gms |
||
Note: 1. In item no.11, import of synthetic rubber
shall not exceed 50% of the total rubber allowed. |
||||||
G18 |
Leather-Cum-Synthetic Golf Gloves/ Synthetic Golf
Gloves with Leather |
1 No |
1 |
|
Relevant Synthetic Leather and OR relevant liner \ lining material |
0.083 Sq. mtrs. |
|
2 |
|
Elastic Tape |
Net content + 1% wastage |
||
|
3 |
|
Binding tape |
Net content + 1% wastage |
||
|
4 |
|
Velcro |
Net content + 1% wastage |
||
|
5 |
|
Logo |
Net content + 1% wastage |
||
|
6 |
|
Snap Fastners |
Net content + 1% wastage |
||
|
7 |
|
Lycra |
0.02 Sq.mtr. |
||
|
8 |
|
Leather Chemicals |
As per Leather Chemicals Prescribed in G-7 ,on pro-rata basis |
||
|
9 |
|
Relevant Knitted Ribbed fabric for Cuff |
1.01 kg/kg content in the export product |
||
Note: 1. In case of export product, Synthetic Golf
Gloves, same norms as above shall be applied. However, import item No. 1
shall be allowed as 1. Relevant Synthetic Leather/ Relevant Liner/ Lining
Materials to the extent of 0.112 sq.mtr. |
||||||
G19 |
Industrial Hand Gloves (Large size) (Based on
consumption of Gloving leather hide/ splits 42cm in length, 4.70 sq.ft) |
1 Pc |
1 |
|
Sewing thread |
18 mts |
G20 |
Industrial Hand Gloves (Medium size) (Based on
consumption of Gloving leather hide/ splits 36cm in length, 3.60 sq.ft) |
1 Pc |
1 |
|
Sewing thread |
17 mts |
G21 |
Industrial Hand Gloves (Small size) (Based on consumption
of Gloving leather hide/ splits 26cm in length, 3.00 sq.ft) |
1 Pc |
1 |
|
Sewing thread |
16 mts |
G22 |
Ladies Closed Leather shoe uppers |
1 Pair |
1 |
a) |
Synthetic lining |
1.5 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.4 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
08.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
04.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
8.00 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
20 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
0.40 mtrs |
||
|
|
j) |
Eyelets |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fastners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: 1. For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per pair is (i) 3.65 sq.ft. if item 1(a) and 1(b) is not
asked for, (ii) 3.25 sq.ft. ifitem 1(b) is not asked for, (iii) 2.15 sq. ft.
if item 1(c) not asked for, and (iv) 1.75 sq. ft. if 1(a) & (c) are asked
for. |
||||||
G23 |
Ladies Leather Half Boot |
1 Pair |
1 |
a) |
Synthetic lining |
3.25 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.4 sq ft |
||
|
|
c) |
Adhesive (PU/ Neoprene/ Latex ) |
30.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
6.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
12.00 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
40 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
0.90 mtrs |
||
|
|
j) |
Sheet for making insole |
0.040 sq mtr |
||
|
|
k) |
Nails/ tacks |
12 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
0.008 kg |
||
|
|
m) |
Unit sole with or without heel |
1 Pair |
||
Per Kg. of P.U. Sole |
1 |
m) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Calalyst |
53 gms |
||
|
|
|
(iv) Pigment Paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
|
m) |
(i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR |
660 gms |
||
|
|
|
(ii) Precipitated Silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 gms |
||
|
1 |
n) |
Heels (if not attached with unit sole) |
Net to Net |
||
|
|
o) |
Shoe-Lace |
Net to Net |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
Net to Net |
||
|
|
r) |
Eyelets |
Net + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net + 1% wastage |
||
|
|
t) |
Zip fastners |
Net + 1% wastage |
||
|
|
u) |
Elastic |
Net + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net + 1% wastage |
||
|
2 |
a) |
Clicking board |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
Note: 1. Antioxidants shall be restricted to 2% of
weight of Natural/ Synthetic Rubber. 2. For requirement of Chemicals,
finished Leather required per pair is (i) 7.4 sq.ft. if item 1(a) and 1(b) is
not asked for, (ii) 7 sq. ft. if item1(a) is not asked for (iii) 4.15 sq.ft.
if item 1(b) is not asked for, and (iv) 3.75 sq.ft. if 1(a) & 1(b) are
asked for. 3. Import of Synthetic rubber shall not exceed 50% of the total
rubber allowed. |
||||||
G24 |
Ladies Leather Half Boot Uppers |
1 Pair |
1 |
a) |
Synthetic lining/Artificial fur lining |
3.25 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.4 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
10.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
06.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
12.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
40 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
0.90 mtrs |
||
|
|
j) |
Eyelets |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fastners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: 1. For requirement of Chemicals, finished Leather
required per pair is (i) 7.4 sq.ft. if item 1(a) and 1(b) are not asked for,
(ii) 7 sq.ft. if item 1(a) is not asked for, (iii) 4.15 sq.ft. if item 1(b)
is not asked for, and (iv) 3.75sq.ft. if 1(a) & (b) is asked for. |
||||||
G25 |
Ladies Leather Long Boot |
1 Pair |
1 |
a) |
Synthetic lining/Natural Fur Lining |
4.25 sq ft |
|
|
b) |
Full insole socks (Synthetic/Natural Fur Lining) |
0.4 sq ft |
||
|
|
c) |
Adhesive (PU/ Neoprene/ Latex ) |
40.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
8.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
15.00 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
60 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
1.30 mtrs |
||
|
|
j) |
Sheet for making insole |
0.040 sq mtr |
||
|
|
k) |
Nails/ tacks |
12 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
0.008 kg |
||
|
|
m) |
Unit sole with or without heel |
1 Pair |
||
Per Kg. of P.U. Sole |
1 |
m) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment Paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
|
m) |
(i) Natural/ Synthetic Rubber PBR/SBR(1502/1712) |
660 gms |
||
|
|
|
(ii) Precipitated Silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 gms |
||
|
1 |
n) |
Heels (if not attached with unit sole) |
1 Pair |
||
|
|
o) |
Shoe-Lace |
1 Pair |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
1 Pair |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
t) |
Zip fastners |
Net content + 1% wastage |
||
|
|
u) |
Elastic |
Net content + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
Note: 1. Antioxidants shall be reestricted to 2% of
weight of Natural/ Synthetic Rubber. 2. For requirement of Chemicals finished
Leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not
asked for, (ii) 9 sq.ft. if item 1(a)is not asked for, (iii) 5.15 sq.ft. if
item 1(b) is not asked for, and (iv) 4.75 sq.ft. if 1(a) & (b) are asked
for.3. Natural Fur Lining will be allowed only if it is reflected in the
export product. 4. Import of Synthetic rubber shall not exceed 50% of the
total rubber allowed. |
||||||
G26 |
Ladies Leather sandals with PU Sole/Rubber Sole/PVC
sole |
1 Pair |
1 |
a) |
Synthetic thread |
10 mts |
|
|
b) |
Footwear dressing |
15 gms |
||
|
|
c) |
Adhesives (PU/ Neoprene/ Cement/ PVA) |
30 gms |
||
|
|
d) |
Insole board |
0.52 sq.ft |
||
|
|
e) |
Polyuerethene foam sheet |
10 gms |
||
|
|
f) |
Buckles |
Net to Net |
||
|
|
g) |
Tacks |
2 gms |
||
|
|
h) |
Unit sole |
Net to Net |
||
Per Kg. of P.U. Sole |
1 |
h) |
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment Agent |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
1 |
h) |
(i) Natural rubber Synthetic rubber PBR/ SBR (1502/1712) |
660 gms |
||
|
|
|
(ii) Precipitated silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxident/ Accelerators |
28 gms |
||
Per Kg. of PVC Sole |
|
|
(i) PVC Resin |
0.5329 Kg |
||
|
|
|
(ii) Plasticiser (DOP) |
0.3997 Kg |
||
|
|
|
(iii) Stabilizer (Ba-Cd-Zn) |
0.0159 Kg |
||
|
|
|
(iv) Antimony Trioxide |
0.014 Kg |
||
|
|
|
(v) Pigments |
0.008 Kg |
||
|
|
|
(vi) Solvents (MEK/Xylene) |
0.0015 Kg |
||
Note: 1. Antioxidants shall be restricted to 2% of
weight of Natural/ Synthetic Rubber. 2. For requirement of Chemicals,
finished leather required per pair is 1.25 sq.ft. per pair. 3. Import of
Synthetic rubber shall not exceed 50% of the total rubberallowed. |
||||||
G27 |
Ladies Leather Sandals Upper. |
1 Pair (Based on 1.25 sq.ft. of finished Upper Leather) |
1 |
|
Accessories: |
|
|
|
a) |
Synthetic Lining |
1.00 sq.ft. |
||
|
|
b) |
Full Insole Socks (Synthetic) |
0.4 sq.ft. |
||
|
|
c) |
Adhesive (Synthetic/Latex) |
20 gms. |
||
|
|
d) |
Shoe finishes (Polish) |
3 gms. |
||
|
|
e) |
Shoe finishes (Spray) |
7 gms. |
||
|
|
f) |
Synthetic Thread |
8 mtrs. |
||
|
|
g) |
Thermoplastic Sheets for counter |
0.013 sq.mtr. |
||
|
|
h) |
Re-inforcement tape (width 1.5 cms) |
0.40 mtr. |
||
|
|
i) |
Eyelets |
Net content + 1% wastage |
||
|
|
j) |
Metallic Fitting |
Net content + 1% wastage |
||
|
|
k) |
Logos |
Net content + 1% wastage |
||
|
|
l) |
Elastic |
Net content + 1% wastage |
||
|
|
m) |
Velcro tape |
Net content + 1% wastage |
||
|
2 |
|
Miscellaneous items: |
|
||
|
|
a) |
Clicking Boards |
1 no./7500 pairs |
||
|
2 |
b) |
Binding Guage |
1 no./10000 pairs |
||
|
|
c) |
Industrial Sewing Machine needle/hammer needle |
50 nos./1000 pairs |
||
|
|
d) |
Bell/Skiving Knives |
1 no./2500 pairs |
||
|
|
e) |
Band Knives for splitting machine |
1 no./5000 pairs |
||
|
|
f) |
Grinding Wheels |
1 no./2500 pairs |
||
|
|
g) |
Feed Rollers |
1 no./5000 pairs |
||
G28 |
Ladies Leather Shoes |
1 Pair |
1 |
a) |
Synthetic lining |
1.50 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.4 sq ft |
||
|
|
c) |
Adhesive (PU/ Neoprene/ Latex ) |
20.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
4.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
8.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
20 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counters |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
0.40 mtrs |
||
|
|
j) |
Sheet for making insole |
0.040 sq mtr |
||
|
|
k) |
Nails/ tacks |
12 gms |
||
|
|
l) |
Thermoplastic cement (rod/ granule/ polyester/ polyamide) |
0.008 kg |
||
|
|
m) |
Unit sole with or without heel |
Net to Net |
||
Per Kg. of P.U. Sole |
|
|
(i) Polyol |
515 gms |
||
|
|
|
(ii) Isocynate |
451 gms |
||
|
|
|
(iii) Catalyst |
53 gms |
||
|
|
|
(iv) Pigment Paste |
31 gms |
||
|
|
|
(v) Release Agent |
45 gms |
||
Per Kg. of Rubber Sole |
|
m) |
(i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR |
660 gms |
||
|
|
|
(ii) Precipitated Silica |
114 gms |
||
|
|
|
(iii) Elasto Polymer |
16 gms |
||
|
|
|
(iv) Antioxidants/ Accelators |
28 gms |
||
Per Kg. of PVC Sole |
|
m) |
PVC Moulding Powder/Granules (in case of PVC Sole) |
1.035 Kg |
||
Per Kg. of TPR Sole |
|
m) |
TPR Granules (in case of TPR Sole) |
1.035 Kg |
||
|
1 |
n) |
Heel (if not attached with unit sole) |
Net to Net |
||
|
|
o) |
Shoe-Lace |
Net to Net |
||
|
|
p) |
Labels/ logos |
Net content + 1% wastage |
||
|
|
q) |
Metallic Shanks (cut to size) |
1 Pair |
||
|
|
r) |
Eyelets |
Net content + 1% wastage |
||
|
|
s) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
t) |
Zip fastners |
Net content + 1% wastage |
||
|
|
u) |
Elastic |
Net content + 1% wastage |
||
|
|
v) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ skiving knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs. |
1 No Per 1000 Pairs |
||
|
|
i) |
Silver marking pencils/ pens/ refills |
1 No Per 1000 Pairs |
||
|
|
j) |
Abrasive paper/ emery paper/ belts/ cup shapes |
1 Sq.mtr Per 150 Pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs Per 1000 Pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs Per 1000 Pairs |
||
|
|
m) |
Plastic shoe last |
4 Pairs Per 1000 Pairs |
||
|
|
n) |
Heating elements |
1 No Per 1000 Pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No Per 500 Pairs |
||
Note: 1. Antioxidants shall be restricted to 2% of
weight of Natural/ Synthetic Rubber. 2. For requirement of Chemicals,
finished Leather required per pair is (i) 3.65 sq.ft. if item 1(a) and 1(b)
are not asked for (ii) 3.25 sq.ft. if item1(b) is not asked for, (iii) 2.15
sq.ft if item 1(c) is not asked for, and (iv) 1.75 sq.ft. if 1(a) & (c)
are asked for. 3. Import of Synthetic rubber shall not exceed 50% of the
total rubber allowed. |
||||||
G29 |
Ladies Long Boot Uppers (Upto knee) |
1 Pair |
1 |
a) |
Synthetic lining |
4.25 sq ft |
|
|
b) |
Full insole socks (Synthetic) |
0.4 sq ft |
||
|
|
c) |
Adhesive (Synthetic/ latex ) |
12.00 gms |
||
|
|
d) |
Shoe Finishes (Polish) |
08.00 gms |
||
|
|
e) |
Shoe finishes (Spray) |
15.0 gms |
||
|
|
f) |
Stamping foil |
06.00 sq.inch |
||
|
|
g) |
Sewing thread |
60 mtrs |
||
|
|
h) |
Thermoplastic sheets for :- |
|
||
|
|
|
1. Counter |
0.013 sq. mtr. |
||
|
|
|
2. Toe Caps/ puffs |
0.008 sq mtr |
||
|
1 |
i) |
Re-inforcement tape (width 1.5 cms) |
1.3 mtrs |
||
|
|
j) |
Eyelets |
Net content + 1% wastage |
||
|
|
k) |
Metallic fittings |
Net content + 1% wastage |
||
|
|
l) |
Zip fastners |
Net content + 1% wastage |
||
|
|
m) |
Logos |
Net content + 1% wastage |
||
|
|
n) |
Elastic |
Net content + 1% wastage |
||
|
|
o) |
Velcro-tape |
Net content + 1% wastage |
||
|
2 |
a) |
Clicking boards |
1 No per 7500 Pairs |
||
|
|
b) |
Binding Guage |
1 No per 10000 Pairs |
||
|
|
c) |
Industrial sewing machine needles/ hammer needle |
40 Pcs per 1000 Pairs |
||
|
|
d) |
Bell/ Skiving Knives |
1 No per 2250 Pairs |
||
|
|
e) |
Band knives for splitting M/c. |
1 No per 2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos per 1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No per 1000 Pairs |
||
Note: For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not
asked for, (ii) 9 sq.ft. if item 1(a) isnot asked for, (iii) 5.15 sq.ft. if
item 1(b) is not asked for, and (iv) 4.75 sq.ft. if 1(a) & (b) are asked
for. |
||||||
G30 |
Ladies Rubber and Canvas footwear with rolled soles |
1000 pairs |
1 |
|
Natural/Synthetic Rubber SBR(1502/1712)/EVA/TPR/Isoprene |
197 kgs. |
|
2 |
|
Accelerators/ Antioxidents/ Retarders |
6.7 kgs. |
||
|
3 |
|
Relevant Colours &Pigments |
3.95 kgs. |
||
|
4 |
|
Fillers |
59 kgs. |
||
|
5 |
|
Adhesive (PU/ Polychloroprene/ PVA/ Acrylics/ Isocyanate) |
16 kgs. |
||
|
6 |
|
Solvents(MEK) |
66 Ltr. |
||
|
7 |
|
Misc.Chemicals Silica, Rosin |
9 kgs. |
||
|
8 |
|
Cotton Textile/Canvas cloth for upper |
170 Sq.mtr. |
||
|
9 |
|
Laces |
Net content + 1% wastage |
||
|
10 |
|
Threads |
18000 mtrs |
||
|
11 |
|
Elastic Tapes |
18 Sq.Mtrs. |
||
|
12 |
|
Components/Embellishments |
Net content + 1% wastage |
||
Note: 1. In Item 1, import of synthetic rubber shall
not exceed 50% of the total rubber allowed. |
||||||
G31 |
Ladies Rubber and Canvas shoes with moulded sole |
One Pair |
1 |
|
Cotton Textile/Canvas for Upper |
0.165 Sq.mtr |
|
2 |
|
Cotton fabric for linning (if used) |
0.160 Sq.Mtr |
||
|
3 |
|
Insole material with lamination |
0.038 Sq.mtr |
||
|
4 |
|
Adhesive (PU/ Polychloroprene/ PVA/ Acrylics) |
16 gms. |
||
|
5 |
|
Solvent(MEK) |
0.066 Ltr. |
||
|
6 |
|
Laces |
Net content + 1% wastage |
||
|
7 |
|
Embellishment |
Net content + 1% wastage |
||
|
8 |
|
Elastic tape |
0.018 Sq. Mtr |
||
|
9 |
|
Thread |
18 Mtrs |
||
|
10 |
|
Sole Moulds |
1 Pair per 10000 pairs |
||
Per Kg. of Moulded Sole(including other rubber material) |
11 |
a) |
Natural/Synthetic Rubber (SBR (1502/1712)/PBR/EVA/TPR/Isoprene |
495 gms. |
||
|
|
b) |
Accelators/Antioxidants |
10 gms |
||
|
|
c) |
Relevant colours and pigments |
10 gms |
||
|
|
d) |
Fillers |
170 gms |
||
|
|
e) |
Misc.Chemicals (Zinc Oxide, Rosin) |
27 gms |
||
Note: 1. In item no. 11, import of synthetic rubber
shall not exceed 50% of the total rubber allowed. |
||||||
G32 |
Laminated leather Split/Crust laminated with
polyurethene Foil |
1 Sq. Mtr. |
1 |
|
Polyurethene Foil |
1.235 Sq. Mtr. |
|
2 |
|
Adhesive |
0.117 Kg. |
||
|
3 |
|
Hardner |
0.00455 Kg. |
||
G33 |
Leather Bags, All Sorts(like Handbags, Shoulder Bags,
Shopping Bags, Portfolio, Travel Bags, School Bags, Ladies Bags, Men's Bags,
Briefcases, Attache Cases, Pouch Bags, Clutch Bags, Evening Bags Rucksacs,
Ladle folios, Belts, Bags etc.) |
|
1 |
|
Lining Materials: |
Actual + 5% Wastage. |
|
2 |
|
Components(Brass Metallic, Synthetic or composite) Snap fastners, Puljers, Rivets, Frames, Logos, Corners, Megnetic Button, Push Clip, Megnetic Locks, Decorative Fittings, Key Holder, Key Ring, Hooks, Plastic Clear Sheet, Woven/Moulded NetSheets, Chains, Ring Binders, Manicure Set Accessories, Money Clip, Angles Spring Clips, Glass beads, Chaton and Buckles etc., Stamping Foil, Adhesive (Synthetic, Latex) Sewing Thread, Elastic, Reinforcement material and Adhesive tape, Locks-Key, Locks-Numbered, Telescopic Carriers, Hanger Clips, Metal Accessories required for the manufacture of Leather Goods. |
Net content + 1% wastage |
||
|
3 |
|
Zip Fastner |
Net content + 1% wastage |
||
|
4 |
|
Misc. items & Spares:Needles, Bobbin, Needle Bar, Feed Dog, Hook Set, Bobbin Case, Bell knives, Bank knives, Pressure foot, Binders gauges, feed rollers, Grinding wheels, Brushes, Clicking Board, Plastic piping cord,repair colour sticks, Edge colours, Silver marking pencil/pen/refills and pattern making boards |
2% of FOB value. |
||
|
5 |
|
Packing Materials: Poly, PU bags, Cardboard/corrugated boxes, art paper, duplex board, adhesive tapes,lables, Tags. |
as per packing policy. |
||
G34 |
Leather Board Counter for Shoes |
1 Sq.cm. |
1 |
|
Leather Board (made of leather scrap) |
1.02sq.cm. |
|
2 |
|
Thermo Plastic Polymide Cement |
0.02 gm. |
||
Note: 1. Approximate size of leather board counter per
pair for Gents shoe is 352 sq.cm., for ladies 300 sq.cm. and for children 344
sq.cm. |
||||||
G35 |
Leather Golf Gloves |
|
1 |
a) |
Elastic (Tapes/sheet/webbing/woven/Non woven) |
Net content + 1% wastage |
|
|
b) |
Tapes(self adhesive/binding tapes) |
Net content + 1% wastage |
||
|
|
c) |
Logos |
1 no. |
||
|
|
d) |
Snap fastner(Metallic/Non-Metallic) |
Net content + 1% wastage |
||
|
|
e) |
Velcro Tapes |
5 cms. |
||
|
2 |
a) |
Sewing Needles |
10 no./2500 gloves |
||
|
|
b) |
Bobbins |
1 no./5000 gloves |
||
|
|
c) |
Needle bar |
1 no./20000 gloves |
||
|
|
d) |
Feed dock |
1 no./20000 gloves |
||
|
|
e) |
Bobbin case |
1 no./10000 gloves |
||
|
|
f) |
Hook set |
1 no./10000 gloves |
||
|
|
g) |
Cutting blades |
1 no./10000 gloves |
||
|
|
h) |
Cutting Knife |
1 no./10000 gloves |
||
|
|
i) |
Taflon |
1 no./10000 gloves |
||
|
|
j) |
Shuttle |
1 no./10000 gloves |
||
|
|
k) |
Clicking Board |
1 no./20000 gloves |
||
|
3 |
|
Relevant Knitted Ribbed fabric for Cuff |
1.01 kg/kg content in the export product |
||
Note: 1. For requirement of processing Chemicals as per
Note 7 under the 'General Notes for Leather and Leather Products', finished
leather required per glove is 1.2 sq.ft. |
||||||
G36 |
Leather Portfolio based on consumption of Leather hide/
skin 012.0 sq ft., Size 17" x 12" |
1 Pc |
1 |
a) |
Linning, material (Woven, non-woven, synthetic, PVC, PU coated fabric) |
1.4 Sq Mtr |
|
|
b) |
Sewing thread |
25 Mtr |
||
|
|
c) |
Adhesive (Synthetic/ Latex ) |
50.00 gms |
||
|
|
d) |
Stamping foil |
01.00 sq inch |
||
|
|
e) |
Components (brass/ metallic/ synthetic) (Zip fastners/ Snap fastners, pullers, sliders, velcro-tape, Elastic tape, Handle holder, Hooks, Handle chain, Rivets, Eyelets, lock, including Magnetic lock, D-rings) |
Net content + 1% wastage |
||
G37 |
Leather Sanddlery Goods Harness: 1)Saddle Sets-14"
to 20" |
1 kg |
1 |
|
Components: |
|
|
|
a) |
Saddle Tree (complete set) |
Net content + 1% wastage |
||
|
|
b) |
Metallic Fitting |
|
||
|
|
c) |
Rubber Grip Reins |
|
||
|
|
d) |
Rhinestone/Trimming & Embelishments (Assorted Size & Design) |
|
||
|
|
e) |
Nylon Webbing |
20 sq.inches. |
||
G38 |
Leather Waist belt (Based on consumption of Leather
hide/ skin 01.0 sq ft Size 30" to 48" average size 40") |
1 Pc |
1 |
a) |
Reinforcement material/ tape |
0.30 sq ft |
|
|
b) |
Thread |
05.00 mtr |
||
|
|
c) |
Adhesive (Synthetic/ Latex ) |
08.00 gms |
||
|
|
d) |
Components (brass/ Metallic/ synthetic) (Rivets, Snap fastners, buckles, Eyelets) |
Net content + 1% wastage |
||
G39 |
Leather Wallets, Purses, Key cases, Card holders, coil
purses, Billfolds, Spects cases, Toilet cases, Passport Covers, Cigarette
cases, Lipstick cases, Cosmetic cases, Manicure cases, Pen cases, Memo cases,
Cheque Book Covers, Ring Binder Bookcovers, Tie cases, vanity cases, Desk Top
sets, camera cases, planners |
1 Pc |
1 |
|
Lining material: |
Actual + 5% Wastage. |
|
2 |
|
Components: |
|
||
|
|
|
Brass Metallic, Synthetic or composite, Snap fastners,Puljers, Rivets, Frames, Logos, Corners, Magnetic Button, Magnetic Locks, Push Clip,, Decorative Fittings, Key Holder, Key Ring, Hooks, Plastic Clear Sheet, Woven/ Moulded Net Sheets,Chains, Ring Binders, Manicure Set accessories, Money Clip, Angle Spring, Clips, Glassfbeads, Chaton and Buckles etc., Stamping Foil, Adhesive (Synthetic, Latex), Sewing Thread, Elastic, Re-inforcement material and Adhesive Tape etc., Elastic, Re-inforcement material and Adhesive tape etc. |
Net to Net. |
||
|
3 |
|
Zip Fastener |
Net content + 1% wastage |
||
|
4 |
|
Miscellaneous items & Spares: |
2% of FOB value. |
||
|
5 |
|
Packing materials: |
As per Packing Policy. |
||
G40 |
Leather welt work shoes |
1 Pair |
1 |
a) |
Synthetic lining PVC/PU |
0.12 Sq. mtrs. |
|
|
b) |
Adhesives: |
|
||
|
|
|
i) PU based |
0.05 ltr. |
||
|
|
|
ii) Neoprene based |
0.025 ltr. |
||
|
1 |
c) |
Shoe Finishes (Polish) |
5 gms |
||
|
|
d) |
Shoe Finishes (Spray) |
10 gms. |
||
|
|
e) |
Stamping Foil |
6 Sq. inch |
||
|
|
f) |
Sewing thread |
70 mtrs. |
||
|
|
g) |
Thermo plastic sheets: |
|
||
|
|
|
For Toe Caps/puffs |
0.009 Sq. mtrs. |
||
|
|
|
For steel Toe Caps |
Net to net |
||
|
1 |
h) |
Moulded Counter (Leather board) |
Net to Net |
||
|
|
i) |
Reinforcement (Plyrib tape) width 25 mm |
1.46 mtr. |
||
|
|
j) |
Sheet for making Insole |
0.05 Sq. mtrs. |
||
|
|
k) |
Nails/tacks |
15 gms. |
||
|
|
|
Shoe staples |
12 Nos |
||
|
1 |
l) |
Thermo plastic cement (rod/granule/polyester/polymide) |
11 Gms. |
||
|
|
m) |
Unit sole with or without heel |
Net to Net |
||
|
|
n) |
Mid sole |
Net to Net |
||
|
|
o) |
Shoe lace |
Net to Net |
||
|
|
p) |
Labels/Logos |
Net to Net |
||
|
|
q) |
Eyelets |
Net to Net |
||
|
|
r) |
Metallic fittings Lacing hooks/D-rings |
Net to Net |
||
|
|
s) |
Plastic/leather/rubber welt in any colour |
1.62 Sq. Mtr. (width upto 5 cm) |
||
|
2 |
a) |
Clicking boards |
1 No./7500 pairs |
||
|
|
b) |
Binding guage |
1 No./10000 Pairs |
||
|
|
c) |
Industrial sewing machines needles/hammer needle |
40 pieces/1000 Pairs |
||
|
|
d) |
Bell/Skiving Knives |
1 No./2250 Pairs |
||
|
|
e) |
Band Knives for splitting machine |
1 No./2250 Pairs |
||
|
|
f) |
Grinding wheels |
2 Nos./1000 Pairs |
||
|
|
g) |
Feed Rollers |
1 No./1000 Pairs |
||
|
|
h) |
Set of cutting dies of various designs |
1 No./1000 Pairs |
||
|
|
i) |
Silver marking pencils/pens/refills |
1 No./1000 pairs |
||
|
|
j) |
Abrasive paper/Emery paper/belts/cup shapes |
1 Sq. mtr./150 pairs |
||
|
|
k) |
Brushes of all types |
2 Pcs./1000 pairs |
||
|
|
l) |
Sea Sponge |
2 Pcs./1000 pairs |
||
|
|
m) |
Plastic shoe last |
4 pairs/1000 Pairs |
||
|
|
n) |
Heating elements |
1 No./1000 pairs |
||
|
|
o) |
Cutters and trimmers (all types) for footwear making |
1 No./500 Pairs |
||
Note:1. Against item No.1(g), import of Steel Toe Caps
and Counters made out of Steel & Leather Board as per the buyer's
requirements can be allowed on net to net basis.2. For requirement of
chemicals, a norm of 2.5 sq.ft. of finished leather per pair may be
considered. |
||||||
G41 |
Sports shoes with leather upper & PVC sole |
1 Pair |
1 |
a) |
Laminated Foam |
0.145 Sq. Mtrs. |
|
|
b) |
Foam |
15 gms. |
||
|
|
c) |
Thread |
25 mtrs. |
||
|
|
d) |
PVC Printing Inks/colour |
5 gms. |
||
|
|
e) |
Solvents (MIBK)/Ethylacetate/Cyclohexane/Ethyl Trichloro ethane |
5 gms. |
||
|
|
f) |
Reinforcement Tapes (maximum width 2.5 cms) |
0.5 mtr. |
||
|
|
g) |
Embelishments |
|
||
|
|
|
i) Velcro/Elastic |
0.1 mtr. |
||
|
|
|
ii) PVC Flocked/Printed sheets |
0.01 Sq.mtr. |
||
|
|
|
iii) Labels |
Net to Net |
||
|
|
|
iv) Plastic fittings |
Net to Net |
||
|
|
|
v) Air Bladder |
Net to Net |
||
|
|
|
vi) Functional components |
Net to Net |
||
|
1 |
h) |
Thermoplastic sheets for: |
|
||
|
|
|
1) Counters |
0.014 Sq. mtr. |
||
|
|
|
2) Toe Caps/puff |
0.009 Sq. mtr. |
||
|
1 |
i) |
Adhesives (PU/ Neoprene/ Latex) |
30 gms. |
||
|
|
j) |
PVC Resin |
581 gms. |
||
|
|
k) |
Plasticizer |
319 gms. |
||
|
|
l) |
Stabilizer |
17.6 gms. |
||
|
|
m) |
Antimony Trioxide |
16.4 gms. |
||
|
|
n) |
Pigments/Titanium Dioxide |
11.6 gms. |
||
|
|
o) |
Lubricants |
6.4 gms. |
||
|
|
p) |
Insole sheets |
0.04 Sq. mtr. |
||
|
|
q) |
Mould release agent |
5 gms. |
||
|
|
r) |
Nylon/Polyester skin fit/Terry Towels for lining |
0.075 Sq. mtr. |
||
|
|
s) |
Mid Soles |
Net to Net |
||
|
|
t) |
Shoe Finishes (Polish) |
5 gms. |
||
|
|
u) |
Shoe finishes (Spray) |
10 gms. |
||
|
|
v) |
Stamping Foil |
6 Sq. inches |
||
|
|
w) |
Shoe Lace |
Net content + 1% wastage |
||
|
|
x) |
Plastic shoe last |
1 No./250 Pairs |
||
|
|
y) |
Set of cutting dies of various designs/printing screen |
1 No./1000 Pairs. |
||
G42 |
Sports shoes with leather upper and moulded sole |
1 Pair |
1 |
a) |
Laminated Foam |
0.145 Sq. mtrs. |
|
|
b) |
Foam |
15 gms. |
||
|
|
c) |
Thread |
25 mtrs. |
||
|
|
d) |
PVC Printing Inks/Colours |
5 gms. |
||
|
|
e) |
Solvents MIBK/ Ethylacetate/ Cyclohexane |
5 gms. |
||
|
|
f) |
Reinforcement Tape (Maximum width 2.5 cm) |
0.5 mtrs. |
||
|
|
g) |
Embellishments |
Net +1% wastage |
||
|
|
h) |
Velcro/Elastic |
0.1 mtr |
||
|
|
i) |
PVC Flocked/ Printed sheets |
0.01 Sq. mtr. |
||
|
|
j) |
Labels |
Net content + 1% wastage |
||
|
|
k) |
Plastic fittings |
Net content + 1% wastage |
||
|
|
l) |
Air Bladder |
Net content + 1% wastage |
||
|
|
m) |
Functional components |
Net content + 1% wastage |
||
|
|
n) |
Thermo Plastic sheets for |
|
||
|
|
|
1) Counters |
0.014 Sq. mtr. |
||
|
|
|
2) Toe caps |
.009 Sq. mtr. |
||
|
1 |
o) |
Adhesives (PU/Neoprene latex) |
30 gms. |
||
|
|
p) |
Unit soles |
Net to Net |
||
Per 1 kg content of PU Sole |
1 |
p) |
i) Polyol |
515 gms |
||
|
|
|
ii) Isocynate |
451 gms |
||
|
|
|
iii) Catalyst for Polyurethane |
53 gms |
||
|
|
|
iv) Pigment paste |
31 gms |
||
|
|
|
v) Release agent |
40 gms |
||
|
1 |
q) |
Mid sole |
Net to Net |
||
|
|
r) |
Nylon/Polyester skin fit/Terry Towels for lining |
0.075 Sq. mtr. |
||
|
|
s) |
Shoe Finishes (Polish) |
5 gms. |
||
|
|
t) |
Shoe finishes (Spray) |
10 gms. |
||
|
|
u) |
Stamping Foil |
6 Sq. inch |
||
|
|
v) |
Shoe Lace |
Net + 1% wastage |
||
|
|
w) |
Shoe Last |
1 Pair/250 Pairs |
||
|
|
x) |
Set of cutting dies/printing screens of various designs |
1 No./1000 Pairs |
||
G43 |
Gents & Boys Leather Chappals, Slippers with
Leather Sole or Synthetic Sole |
1 Pair |
1 |
|
PVC Leather Cloth or Velvets |
2 Sq.ft. |
|
2 |
|
Full Insole Socks (Synthetic) |
0.5 Sq.ft. |
||
|
3 |
|
Artificial Leather or P.U. Leather Cloth |
1.80 Sq.ft. |
||
|
4 |
|
Stamping Foils |
4 Sq.Inches |
||
|
5 |
|
Adhesive (P.U.) |
30 gms. |
||
Note: Item 2 shall be allowed only if it is used for
manufacture of the export product. |
||||||
G44 |
Ladies & Girls Leather Chappals, Slippers &
Sandals with Leather Sole and Synthetic Sole |
1 Pair |
1 |
|
PVC Leather Cloth or Velvets |
2 Sq.ft. |
|
2 |
|
Full Insole Socks (Synthetic) |
0.4 Sq.ft. |
||
|
3 |
|
Artificial Leather or P.U. Leather Cloth |
1.20 Sq.ft. |
||
|
4 |
|
Stamping Foils |
4 Sq.Inches |
||
|
5 |
|
Adhesive (P.U.) |
30 gms. |
||
Note: Item 2 shall be allowed only if it is used for
manufacture of the export product. |
||||||
G45 |
Gents Leather Half Boot Lasted Upper |
1 Pair |
1 |
a) |
Synthetic Lining |
3.75 Sq.ft. |
|
|
b) |
Adhesive(Latex) |
12 gms |
||
|
|
c) |
Stamping Foil |
6 Sq.Inches |
||
|
|
d) |
Sewing threads |
50 mtrs. |
||
|
|
e) |
Thermoplastic Sheet for: |
|
||
|
|
|
i)Counter |
0.014 Sq.mtr. |
||
|
|
|
ii)Toe Caps/Puffs |
0.009 Sq.mtr. |
||
|
1 |
f) |
Re-inforcement Tape (Max. width 1.5 cm.) |
1.10 Mtr. |
||
|
|
g) |
Sheets for making insole |
0.050 Sq.mtr. |
||
|
|
h) |
Nails/Tacks |
15 gm. |
||
|
|
i) |
Shoe Lace |
1 Pair |
||
|
|
j) |
Labels/Logos |
Net content + 1% wastage. |
||
|
|
k) |
Eyelets |
Net content + 1% wastage. |
||
|
|
l) |
Metallic Fitting |
Net content + 1% wastage. |
||
|
|
m) |
Zip Fastners |
Net content + 1% wastage. |
||
|
|
n) |
Elastic |
Net content + 1% wastage. |
||
|
|
o) |
Velcro tape |
Net content + 1% wastage. |
||
|
2 |
a) |
Clicking Boards |
1 No./7500 pairs. |
||
|
|
b) |
Binding Guage |
1 No./ 10000 pairs. |
||
|
|
c) |
Industrial Sewing machine needles/hammer needle |
40 Pcs./ 1000 pairs. |
||
|
|
d) |
Bell/Skiving Knives |
1 No./2250 pairs. |
||
|
|
e) |
Band knives for Splitting M/C |
1 No./2250 pairs. |
||
|
|
f) |
Grinding wheels |
2 No./1000 pairs. |
||
|
|
g) |
Feed Rollers |
1 No./1000 pairs. |
||
|
|
h) |
Silver marking pencils/pens/refills |
1 No./1000 pairs. |
||
|
|
i) |
Abrasive paper/emery paper/belts/cup shapes |
1 Sq.mtr./ 150 pairs. |
||
|
|
j) |
Sea Sponge |
2 Pc./1000 pairs. |
||
|
|
k) |
Plastic Shoe Last |
4 Pairs/ 1000 pairs. |
||
G46 |
Finished Leather from Skin of Goat/ Sheep/ Calf |
1000 Sq.ft. |
1 |
|
Preservative |
1.5 kg |
|
2 |
|
Wetting Agent |
5 kgs |
||
|
3 |
|
Soaking Enzyme |
2.5 kgs |
||
|
4 |
|
Unhairing Agent: |
|
||
|
|
a) |
Sodium Sulphide |
2. kgs |
||
|
|
b) |
Sulfohydrate |
2.5 kgs |
||
|
5 |
|
Leather Linning Auxilliaries |
1.5 kg |
||
|
6 |
|
Deliming Agent |
2.5 kgs |
||
|
7 |
|
Bating Agent |
5 kgs |
||
|
8 |
|
Leather Degreasing Agent (Fatty Alcohol/ Esters/ Fatty Acid Derivatives) |
5 kgs |
||
|
9 |
|
Bleaching Agent (Sodium Bisulfite/ Hydrogen Peroxide/ Sodium Chlorite/ Potassium Permanganate) |
1.5 kg |
||
|
10 |
|
Formic Acid |
10 kgs |
||
|
11 |
|
Acetic Acid |
2.5 kgs |
||
|
12 |
|
Chrome Tanning Agent: |
|
||
|
|
a) |
For all Chrome Tanned Leather |
|
||
|
|
b) |
For Vegetable Tanned Leather Main vegetable tanning agents such as Wattle or Mimosa/ Quebracho and Supplementary vegetable Tanning agents such as Gambier/ Chestnut/ Tara/ Sumac subject to the condition That Supplementary Tanning agents suchas Gambier, Chestnut, Tara and Sumac Shall be allowed a maximum of 11 kg. |
55 kg |
||
|
|
c) |
For combination of tanned leather / semi-chrome tanned
leather |
|
||
|
13 |
|
Zirconium Tanning Salt |
5 kgs |
||
|
14 |
|
Sodium Formate/ Acetate |
5 kgs |
||
|
15 |
|
Sodium Bicarbonate |
4 kgs |
||
|
16 |
|
Soda Ash |
2 kgs |
||
|
17 |
|
Magnesium Oxide |
2.5 kgs |
||
|
18 |
|
Syntan |
20 kgs |
||
|
19 |
|
Borax |
5 kgs |
||
|
20 |
|
Oxalic Acid |
2.50 kgs |
||
|
21 |
|
Sodium thio-sulphate |
5 kgs |
||
|
22 |
|
Sodium Dithionate (Hy-drose) |
1 kgs |
||
|
23 |
|
Fatliquors |
20 kgs |
||
|
24 |
|
Dye Levelling Agent |
1 kgs |
||
|
25 |
|
Dyes (Acid dyes/ Direct Dyes/ Premetallised dyes/Basic Dyes/ Reactive dyes/ sulphur dyes) |
10 kgs (Out of the total quantity of 10 kgs, the quantity of Reactive dyes shall not exceed 0.5 kg) |
||
|
26 |
|
Dispersing Agent |
2.5 kgs |
||
|
27 |
|
Cationic dyes Fixative/Impreg-nating Resin |
5 kgs |
||
|
28 |
|
Pigments |
10 kgs |
||
|
29 |
|
a) Binders other than those indicated below |
10 kgs |
||
|
|
|
b) Casein based binders |
15 kgs |
||
|
|
|
Resin/Polyurathane based binders |
10 kgs |
||
|
30 |
|
Liquid Dyes (based on Acid dyes/Basic dyes/Metal complex dyes) |
10 ltrs |
||
|
31 |
|
Feel Modifiers |
1 kg |
||
|
32 |
|
Lacquer Emulsion |
10 kgs |
||
|
33 |
|
Slipagents (Silicon based Oil) |
1 kg |
||
|
34 |
|
Fixing Agents/ Cross Linkers (Formaldehyde free) |
1 kg |
||
|
35 |
|
Wax Emulsion |
2 kgs |
||
|
36 |
|
Oil/Wax for pull up finish |
15 kgs |
||
|
37 |
|
Fillers for Leather Industry |
3 kgs |
||
|
38 |
|
Spl. Auxiliaries for Stain/ Fire/ Grease/ Water/ Alkali/ Acid/ Oil resistance |
5 kgs |
||
|
39 |
|
Pearlised Pigment and Powder |
1 kg |
||
|
40 |
|
Fluorescent Pigment |
4 kgs |
||
|
41 |
|
Special Lacquer for Brush off/ Two tone |
10 kgs |
||
|
42 |
|
*Transfer foil (Polyester/ Polyurethane Metalised film - Silver/ Gold/ Bronze/ Mat/ Plain/ two Tone effect/ Glazy/ Nubuck effect/ Pull up effect/ Suede effect/Floral and other design effects) |
120 sq.mtrs |
||
|
|
|
Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. |
|
||
|
43 |
|
Miscellaneous Items: |
|
||
|
|
|
a) Knife Blades/ Band Knives: |
|
||
|
|
|
b) Grinding Wheels for Splitting Machine/Fleshing Machine/Shaving Machine |
Upto 5% of FOB value of export, out of which value of each of the items at (e), (g) & (h) shall not exceed 5% of the overall CIF value of Miscellaneous items permitted for import |
||
|
|
|
c) Felt/Felt Sleeves Samming Machine/ Setting cum Samming/Polishing Felt Roller |
|
||
|
|
|
d) Stones: |
|
||
|
|
|
e) Emery Paper: |
|
||
|
|
|
f) Glazing Glass |
|
||
|
|
|
g) Padding Mohair cloth |
|
||
|
|
|
h) Embossing plate |
|
||
Note: 1. Item No. (ii) for 12 (a) shall not be allowed
for the grain garment leather and gloving leather.Note: 2. Supplementary
Vegetable Tanning Agents Gambier/ Chestnut/ Tara/ Sumac shall be allowed for
import on Actual User condition. In case of DFRC, these items shall be used
by the licensee only and shall not be allowed for transfer/sale. |
||||||
G47 |
Finished Leather Sofa Cover (Stitched) |
1000 Sq.ft. |
1 |
|
Relevant lining |
1.05 sq.mtr./sq.mtr. content in the export product |
|
2 |
|
Polyester wading |
1.05 sq.mtr./sq.mtr. content in the export product |
||
|
3 |
|
Zippers |
Net + 1% wastage |
||
|
4 |
|
Velcro |
Net + 2% wastage |
||
|
5 |
|
Runner (slider) |
Net + 1% wastage |
||
|
6 |
|
Relevant double fused tape |
Net + 1% wastage |
||
Note: 1. The items thread and needle shall not be
allowed. 2. The norms for the chemical items are to be allowed as per SION
G-7 of finished leather. |
||||||
G48 |
Leather Carpet |
1000 Sq.ft. |
1 |
|
Chemicals |
As per SION G-7 with the condition that the import items at sl.no.40 & 41 shall be disallowed |
|
2 |
|
Cotton Durry |
1.05 kg. per kg. content in the export product |
||
|
3 |
|
Packing material |
As per packing policy |