[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
DEPARTMENT OF REVENUE
CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS
NEW DELHI

NOTIFICATION NO

13/2024-Customs (ADD); Dated: June 27, 2024

G.S.R. 351(E). - Whereas, in the matter of 'Telescopic Channel Drawer Slider' (hereinafter referred to as the subject goods), falling under tariff items 83024110, 8302 4190, 83024200 and 83024900 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in or exported from China PR (hereinafter referred to as the subject country) and imported into India, the designated authority vide its preliminary findings F. No. 6/13/2023-DGTR, dated the 19th April, 2024, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 19th April, 2024, has provisionally concluded that-

(i) the product under consideration that has been exported to India from the subject country are at dumped prices;

(ii) the domestic industry has suffered material injury;

(iii) material injury has been caused by the dumped imports of the subject goods from the subject countries,

and has recommended imposition of provisional anti-dumping duty on imports of the subject goods, originating in, or exported from the subject country and imported into India, in order to remove injury to the domestic industry.

Now, therefore, in exercise of the powers conferred by sub-section (2) of section 9A of the Customs Tariff Act read with rules 13 and 20 of the Customs Tariff (Identification, Assessment and Collection of Anti-dumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, on the basis of the aforesaid preliminary findings of the designated authority, hereby imposes on the subject goods, the description of which is specified in column (3) of the following Table, falling under the Chapter of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the countries as specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported into India, a provisional anti-dumping duty equal to the amount indicated in the corresponding entry in column (7), in the currency as specified in the corresponding entry in column (9) and as per unit of measurement as specified in the corresponding entry in column (8) of the said Table, namely:-

TABLE

Note: Customs classification is only indicative, and the determination of anti-dumping duty shall be made as per the description of the PUC.

2. The provisional anti-dumping duty imposed under this notification shall be effective for a period of six months, unless revoked, amended or superseded earlier, from the date of publication of this notification in the Official Gazette and shall be payable in Indian currency.

Explanation- For the purposes of this notification, rate of exchange applicable for the purposes of calculation of the anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Customs Act.

[F. No. CBIC- 190349/8/2024 - TO(TRU-I)]

(Vikram Vijay Wanere)
Under Secy.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
DEPARTMENT OF REVENUE
CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS
NEW DELHI

NOTIFICATION NO

12/2024-Customs (ADD); Dated: June 27, 2024

G.S.R. 350(E). - Whereas in the matter of 'Easy open ends of tin plate, including electrolytic tin plate (ETP), measuring 401 Diameter (99MM) and 300 Diameter (73MM) in dimension' (hereinafter referred to as the subject goods) falling under tariff item 83099090 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR (hereinafter referred to as the subject country), and imported into India, the designated authority in its final findings vide notification F. No. 6/1/2023-DGTR, dated the 28th March, 2024, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 28th March, 2024, read with Corrigendum issued vide notification F. No. 6/1/2023-DGTR, dated the 22nd May, 2024 has come to the conclusion that-

(i) the subject goods have been exported to India from the subject country at dumped prices;

(ii) the domestic industry has suffered material injury on account of subject imports from subject country;

(iii) the material injury has been caused by the dumped imports of subject goods from the subject country,

and has recommended imposition of an anti-dumping duty on the imports of subject goods, originating in, or exported from the subject country and imported into India, in order to remove injury to the domestic industry.

Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs Tariff Act read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Antidumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is specified in column (3) of the Table below, falling under tariff heading of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the country as specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported into India, imposes a definitive anti-dumping duty equal to the amount mentioned in Column (7), in the currency as specified in corresponding entry in column (9) and as per unit of measurement as specified in the corresponding entry in column (8) of the Table below for a period of five years, namely:-

TABLE

*Note-1: The followings are not covered in the scope of product:

a) Easy open ends that are manufactured of materials other than tin plate, such as aluminium, tin free sheet etc.

b) Easy open ends having dimensions other than 401 Diameter (99MM) and 300 Diameter (73MM) of any make/input material.

c) Easy open ends of partial or short aperture of any make and dimension.

2. The anti-dumping duty imposed under this notification shall be levied for a period of five years (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be payable in Indian currency.

Explanation. – For the purposes of this notification, rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Act.

[F. No. CBIC- 190349/3/2024-TO(TRU-I)]

(Vikram Vijay Wanere)
Under Secy.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
DEPARTMENT OF REVENUE
CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS
NEW DELHI

NOTIFICATION NO

11/2024-Customs (ADD); Dated: June 27, 2024

G.S.R. 349(E). - Whereas in the matter of ‘alloy steel chisel/ tool and hydraulic rock breaker in fully assembled condition’ (hereinafter referred to as the subject goods) falling under chapter headings 84314930 and 84314990 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR and Korea RP (hereinafter referred to as the subject countries), and imported into India, the designated authority in its final findings vide notification number 6/8/2022- DGTR, dated the 28th March, 2024, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 28th March, 2024, has come to the conclusion that–

(i) the subject goods have been exported to India from subject countries below its normal value, thus resulting in dumping of the product;

(ii) the domestic industry has suffered material injury due to dumping of the subject goods;

(iii) the material injury has been caused by the dumped imports of the subject goods originating in or exported from the subject countries,

and has recommended imposition of definitive anti-dumping duty on the imports of subject goods, originating in, or exported from the subject countries and imported into India, in order to remove injury to the domestic industry.

Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs Tariff Act, read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Antidumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is specified in column (3) of the Table below, falling under chapter heading of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the countries as specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported into India, an antidumping duty at a rate as specified in the corresponding entry in column (7) of the said Table, namely:-

TABLE

#1

For Hydraulic Rock Breakers:

a. Hydraulic Rock Breakers are used in construction and mining industry along with Alloy Steel Chisels for carrying out demolition, excavation, mining, concrete and boulder breaking activities. Hydraulic Rock Breakers are imported and sold in fully assembled condition as well as in semiknocked (SKD) condition and CKD (completely knocked down) condition, wherein different assemblies. sub-assemblies as mentioned in Table D1 below can be imported to form fully assembled hydraulic rock breakers.

b. The duties mentioned in column 7 of the Duty Table above for fully assembled Hydraulic Rock Breakers shall be applicable to imports of Hydraulic Rock Breakers and the Assemblies/Subassemblies mentioned in Table D1 only.

c. Where Alloy Steel Chisels are imported with Hydraulic Rock Breakers, anti-dumping duties applicable to Alloy Steel Chisels shall be applicable to such Alloy Steel Chisels. Anti-dumping duties for hydraulic rock breakers and its assemblies/sub-assemblies mentioned in Table D1, shall not be made applicable to alloy steel chisels or vice-versa. (Also refer point h. below)

d. The duties on hydraulic rock breakers shall be applicable only to the following assemblies/subassemblies and not to other parts and components of hydraulic rock breakers:

TABLE D1
Assemblies/sub-assemblies of hydraulic rock breakers covered under the scope of anti-dumping duties	Pictorial Representation of Component*
a. Front head
b. Back head
c. Piston for hydraulic cylinder or rock breaker
d. Cylinder body or hydraulic unit (Hydraulic body consists of front head, back head, cylinder and piston)
e. Bracket
f. Frame
g. Cylinder for hydraulic rock breaker

*The photos are for representative purposes only. The form of the actual assemblies/sub-assemblies may vary.

e. The recommended duties on assemblies/sub-assemblies shall be applicable on them irrespective of the fact that whether they are imported individually or along with other assemblies/subassemblies mentioned in Table D1 above.

f. It is to be ensured that exporters do not attempt to evade the recommended duties by physically combining two or more assemblies/sub-assemblies together to establish that they are exporting a different assemblies/sub-assembly other than what has been covered in Table D1 above. Further, the description of the goods being cleared should be captured adequately in terms of value and unit of measurement.

g. The duties applicable to hydraulic rock breakers shall not be applicable to any other assemblies/sub-assemblies, part or component, or kits which have not been mentioned in Table D1 above.

#2

For Alloy Steel Chisels:

h. Alloy Steel Chisels are used along with hydraulic rock breakers. They come in various shape, size and the tip of the chisel varies according to the required end use.

i. Alloy Steel Chisels are also imported by the name of tool, wedge, toil, moil, teeth, tooth, working tool, chisel blunt, hydraulic hammer (tool), breaker tool etc. Where chisels are imported with rock breakers, anti-dumping duties applicable to chisels shall be applicable to such chisels. Antidumping duties applicable to alloy steel chisels shall not be made applicable to hydraulic rock breakers or its assemblies/sub-assemblies mentioned in Table D1 above. (Also refer point b above).

2. The anti-dumping duty imposed under this notification shall be effective for a period of five years (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be payable in Indian currency.

Explanation. - For the purposes of this notification, -

(a) rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Act.

(b) "CIF value" means the assessable value as determined under section 14 of the Customs Act, 1962 (52 of 1962).

[F. No. CBIC-190354/160/2023-TO(TRU-I)]

(Ikram Vijay Wanere)
Under Secy.

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
DEPARTMENT OF REVENUE
CENTRAL BOARD OF INDIRECT TAXES AND CUSTOMS
NEW DELHI

NOTIFICATION NO

10/2024-Customs (ADD); Dated: June 27, 2024

G.S.R. 348(E).- Whereas in the matter of "Sodium Cyanide" (hereinafter referred to as the subject goods) falling under heading 2837 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR, European Union, Japan and Korea RP (hereinafter referred to as the subject countries), and imported into India, the designated authority in its final findings vide notification F. No. 6/03/2023-DGTR, dated the 28th March, 2024, published in the Gazette of India, Extraordinary, Part I, Section 1, dated the 28th March, 2024, has come to the conclusion that,

(i) the subject goods have been exported to India from the subject countries at dumped prices;

(ii) the domestic industry has suffered material injury on account of subject imports from subject countries;

(iii) the material injury has been caused by the dumped imports of subject goods from the subject countries,

and has recommended imposition of an anti-dumping duty on the imports of subject goods, originating in, or exported from the subject countries and imported into India, in order to remove injury to the domestic industry.

Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs Tariff Act read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Antidumping Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is specified in column (3) of the Table below, falling under heading of the First Schedule to the Customs Tariff Act as specified in the corresponding entry in column (2), originating in the country as specified in the corresponding entry in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the producers as specified in the corresponding entry in column (6), and imported into India, an antidumping duty calculated at the rate as specified in the corresponding entry in column (7), of the said Table, namely:-

TABLE

* The Customs classification is indicative only and is not binding on the scope of the product under consideration.

2. The anti-dumping duty imposed under this notification shall be levied for a period of five years (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be payable in Indian currency.

Explanation.–For the purposes of this notification, rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue), issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962), and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of entry under section 46 of the said Act.

[F.No. CBIC- 190354/81/2024-TO(TRU-I)-CBEC]

(Nitish Karnatak)
Under Secy.